Description of Flashforge Filament PVA

• Filament PVA Nature 0.5 kg
  
  - This is a material that functions as a support and dissolves in water. It takes approximately 75 minutes at 23 degrees.
  Specifications
  Filament type: PVA
  Diameter: 1.75 mm
  Printing temperature: 190 ~ 220 degrees
  Printing speed: 60 ~ 90 mm/s
  Layer height: 0.2 mm
  Weight: 0.5 kg
  Density: 1.25 ± 0.05 g/cm^3
  MFR (190, 2.16 kg): 2 ~ 4 g/10 min
  Water absorption (equilibrium in water, 23 degrees) --
  Tensile strength: ≥ 10 MPa
  Flexural strength: ≥ 15 MPa
  Tensile modulus: ≥ 190 MPa
  Izod impact strength (IZOD, 23 degrees): ≥ 16J/m (ASTM D256)
  Elongation @ break: ≥ 11.0%
  Heat distortion temperature: ≥ 55 degrees
  Diameter tolerance: ± 0.08 mm
  Roundness deviation: ≤ 0.08 mm
  Color: neutral